Drakeol Rain Lamp Oil 💧64oz CLEAR Turns Electric Blue Under UV Black Light! 💧

Description: Vintage Oil Rain Lamp by Hughes Wave Motion Machines With Drakeol 35 Oil (Oil is For Sale)Video will open in a new window Using the eBay App? Paste link into a browser window:This oil is a is CLEAR in daylight and it fluoresces bright ELECTRIC BLUE as shown under a black light! This is one of a kind oil you will only find here! Instructions for adding the oil are below. 64 ounces in total no matter how it is packaged. Works in all vintage Rain Lamps from Johnson, Creators and the later overseas models alike. Video above shows plain clear oil. Packaging may vary from photos as I do use recycles spring water bottles to save you money. No need for fancy packaging when you know what you have is the BEST. :) We recommend a 50-100W 395nm UV LED Flood Panel which can be found here on eBay. This oil is specifically produced for use in all sizes of vintage rain drip lamps from the 60's, 70's and 80's. Check my other listings for the standard Clear oil offered in: RED, BLUE, PURPLE, YELLOW, SMOKE BLACK, ORANGE, CORAL or GREEN at no additional cost! NOTE: Beware of coattail riders trying to rip you off with thin, runny, splashing, drug store baby oil listed as Drakeol 35! This oil is not meant for your rain lamp and doesn’t make droplets but rather runs down the strings and splashes because it is so thin! I don't know how they get away with trying to copy my success with inferior products. Read below, check my feedback on this oil and buy with confidence that you are putting the original in your beloved vintage rain lamp!Check out the rave reviews on this product! Most large rain lamps that are 20-27" tall require about 32 ounces. It is the buyer's responsibility to refer to the instruction manual for their specific machine to determine the amount of oil required. This amount is a general figure for MOST lamps. Auction is for OIL ONLY. No lamp included. The instructions to add the oil are quite simple: 1. Place plastic sheeting under your work area and cover it with newspaper. Keep paper towels handy in case of spills and drips.2. Turn on the rain lamp.3. Use a paper towel to gently wipe oil from the fishing strands where you will be working. Locate the holes in the bottom pan of the cage under the foliage and statue. There is not a specific oil fill hole. The oil will find its way through the same holes that collects oil drips from the fishing line strands. The collection basin is under the cage where the oil collects and is pumped to the top of the lamp.4. Slowly pour the first pint of oil into the bottom of the cage under the foliage.5. Wait five minutes for the rain effect to start and listen for a change in the sound of the pump.6. Add another half pint of oil if the rain has not started or there is no change in the sound of the pump.7. Wait five minutes and repeat pouring a half pint of oil at a time until the rain looks normal and the pump sounds somewhat muted.8. Expect to pour at least one pint of oil but no more than three pints. Stop adding oil when the raining effect looks normal. Do not use too much oil, because it can overwhelm the pump.NOTE:The lamp needs to be on a level surface. If you add too much oil, you will saturate the electrical mechanism and the pump will not function properly so that the oil never reaches the top. If this occurs, remove some of the oil by removing the three nuts that bolt the metal base tray down at the bottom and remove some oil. Only the impeller of the pump should be submerged in the oil.

Price: 49.99 USD

Location: Maple Shade, New Jersey

End Time: 2025-01-22T13:32:23.000Z

Shipping Cost: 8.75 USD