Furuno GP-1650D Color DGPS Plotter with bracket, cover, antenna

Description: This has been kicking around my boat lab for ages, acquired from a friend who was upgrading to a NavNet system. I have never used it myself, but it is definitely used. Some notes: It contains a C-MAP card for the Puget Sound to Port Hardy region. I just powered it up on my lab supply -- there is the original 3-pin connector (Pos/Neg/Gnd) with a short cable, and I tested to confirm polarity. The white wire is positive and black negative. It woke up immediately, and failed two items in its self test: no GPS antenna connected, and internal battery is dead. The Furuno part number for that battery is 001-428-240-00, and if it is not replaced, it won't remember waypoints and other data through power cycles. The antenna is included, but the TNC connector was lopped off long ago. This is a common part, and the cable is approximately RG-58. IMPORTANT: I don't have a connector or cable for the NMEA-0183 output. There is a stray gray cable with no connectors in the box, which I will include (not shown) Naturally, newer units are better in every way, so if you are starting from scratch I would not recommend buying this relic. But if you already have one, and would like a spare... or need a cheap but very slow DGPS unit with ancient graphics, then this might be useful. Included in this listing: -- the Furuno GP-1650D-- GPA-018 external GPS and Differential antenna, no TNC connector on coax cable (DGPS whip is not included - it is a standard 3/8-24 thread and is 1.2 meters long... a CB stick should work)-- Trunion bracket and knobs-- Power cable with 3A inline fuse, about 2.5 feet long-- Sun cover for the plotter Shipping weight is about 10 pounds. Cheers and fair winds!

Price: 200 USD

Location: Friday Harbor, Washington

End Time: 2024-11-21T18:43:35.000Z

Shipping Cost: N/A USD