Description: TORNADO TERRYS THIS AUCTION IS FOR1 RED JOYSTICK, DOES NOT COME WITH WIRING OR TERMINAL CONNECTORS, JUST WHAT IS SHOWN IN THE PICTURE! THIS WILL NOT FIT THE 1 UP HEAD TO HEAD COCKTAIL! I tell all of my customers, " If you miss a move with my joystick, it's your fault! Terry ORDER OF ASSEMBLY: Picture 1. Shows parts that come in the kit.2. Dust washer on shaft - lip up.3. 1st E clip on shaft.4. Black pivot cone big end towards base.5. Install into base.6. White cone big end towards base.7. Install last E clip as directed.8. Shows which terminals are used to make your connections. 1 up users: READ ALL DIRECTIONS FIRST For retrofitting this stick into arcade 1 up cabs you will need new 3/4 inch screws and 2 small flat washers per screw and it will fit nicely. The factory screws are too short and the hole pattern is not the same but when you are done its perfect! REMOVE JOYSTICK:Cut the wires from the existing stick at the stick, there are 2 wires to each position. make sure not to get the wires mixed up. You should have have 4 colors of wire. Make a note of the color wire VS its direction, up, down left right. After the cut you will have 2 wires for each color or a total of 8 wires. CONNECTIONS:After securing the new joystick base in place, you will be using the ODD terminal marked COM of each switch and the closest one to the COM terminal to make the connections for the new stick, Do not use the last terminal.You will also need .187 push on connectors, a pair of crimpers and a pair of strippers, (No not that kind LOL !), DO NOT SOLDER the terminals, you will ruin the spring inside the switches! Strip the ends of the wires and crimp a .187 terminal on to each of the wires you just cut. Repeat for the other 3 switches, I suggest you only do 2 wires at a time.Plug the wires on to the new joystick, It does not matter which wire goes where as long as you use the ODD terminal and the one next to it. The farthest terminal from the odd terminal is not used GALAGA 1 up users, you can use this stick to do Galaga 1 up Enjoy! We have sold 100's of these since that machine was released with no comebacks and the folks that did contact us told us we were recommended on REDDIT for this stick and they were very happy with it! Enjoy! If you have any questions about this or any of the products we sell, E MAIL USGENUINE HAPP 4 WAY ONLY JOYSTICK BASEWITH A LARGERTORNADO TERRYS BALL TOP & LONGER SHAFT FOR 1 UP WOOD PANELSTHIS IS A TORNADOTERRYS EXCLUSIVE 1. SHAFT IS LONGER FOR 1 UP WOOD PANELS2. BALL TOP IS CORRECT SIZE FOR MS PAC MAN AND ALL OTHER PAC GAMES3. CORRECT MATT FINISH4. I'VE BEEN DOING THIS FOR 40 + YEARS SO I KNOW WHAT IT TAKES TO MAKE YOUR MS PAC MAN WORK PROPERLY!MISSING TURNS?NOT WITH MY STICKYOU MISS A TURN USING MY STICK, ITS YOUR FAULT! WILL WORK FOR FROGGER, DIG DUG, MS PAC MAN, PAC MAN, DRAGONS LAIR , FROGGER, MR DO AND MANY MORE! Default color is REDSTICK WILL NOT DO 8 WAYHAPP DOES NOT SELL THIS STICK.NEITHER DOES OUR COMPETITION HERE ON EBAY NO INTERNATIONAL SHIPPINGFREE USA SHIPPINGTRACKING & DELEVERY CONFIRMATION - NO CHARGE. THANKS IN ADVANCE
Price: 31.03 USD
Location: Keller, Texas
End Time: 2024-07-27T15:25:02.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: 15%
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Brand: HAPP
Game Title: Ms. Pac-Man
Country/Region of Manufacture: United States
