Stainless Steel Rack Mount Screw & Washer Set for Pioneer Spec JA-R1A JA-R2S

Description: This is a set of 4 screws and washers to mount most vintage Pioneer rack-mountable audio components to the vintage Pioneer JA-R1A or JA-R2S audio racks. They are NOT original Pioneer parts. These screws can mount most Pioneer components with a thick (~5mm) front panel such as:Pioneer Spec 1, Spec 2, Spec 3, Spec 4, C73, C77Pioneer RT-701, RT-707, RT-901, RT-909 Pioneer JA-R101 rack tray (used to mount many SA amplifiers, TX tuners and SG equalizers)Pioneer JA-R102 cassette deck handles (used to mount the CT-F700, CT-F900, CT-F950, CT-F1000, CT-F1250) Your purchase of a set includes: four screws with trim washers and nylons washers: ScrewsMade of A1 stainless steelM5 x 0.80 metric thread, like the original Pioneer JA rack screws Same length as the original Pioneer JA rack screws Trim Washers Made of A1 stainless steelHave a brushed-look finish Are solid, not hollow, like the originalHave a slightly larger base diameter (14mm versus 12.5mm) than the original Pioneer trim washers, which can be helpful to hide imperfections/previous screw marks on the front panel of your Pioneer componentsNylon WashersAre about 60% thicker (1.6mm versus 1.0mm) that the original Pioneer nylon washers. They will better protect your components (see photo comparing to the original Pioneer part).Since they are thicker, they have a smaller inner diameter for the screw to slide through the nylon. Slight force is needed to slide nylon washer over the replacement screws. I will ship the screws with the nylon washers installed as shown in the first photo The insulators also have a longer shaft (4.0mm versus 2.8mm) than the original Pioneer insulators. These replacements will work well for your 5mm thick front-panel Pioneer components as listed above Normal 0 false false false EN-US X-NONE X-NONE

Price: 10.99 USD

Location: St. George, Utah

End Time: 2023-10-09T16:21:17.000Z

Shipping Cost: 5 USD